Sunlight Stencil sheet, 55t
compatible with Screen Sensation MYOS 280
Choose size A 5-A4- 11X11- A3 .
Perfect for textile ,paper,board and wood silk screen printing .
Create a custom made stencil, using the sun and tap water .
An end to cutting shapes using razer sharp craft knives. 100% child friendly.
30 seconds exposure in the sun
Super Fast exposure.
super tough surface.
12 months use by date.
Photo stencil A5 sheet red 55t hobby craft
Photo stencil, red 55t, size A5 Sheet .Firstly 12 MONTH SHELF LIFE (Images can be burnt onto these sunlight stencil sheets within 12 months of purchase)
RED Photo stencil
You will receive plain coated sheets to burn your OWN CUSTOM images.
Supplied in A5 size.
above all, rank 1st page google
stencil sheet red are available in a wide range of meshes.
Here is a general outline of what size Stencil Sheet to use for your printing needs.
Your basic and most standard mesh size is 43T, which lays a fairly thick layer of ink and is great for block text.
A 55T Sunlight Stencil sheet, also allows for a slightly thinner layer of ink and also enables some finer detail in your image due to the finer mesh.
A 15T Sunlight Stencil sheet is used for Glitter, shimmer and inks that have a high viscosity.
The glitter particles will not usually pass through a mesh count of higher than 15T.
Therefore you need a lower mesh count with larger holes.A 77T Photo stencil sheet allows for fine detailed images and thinner inks.
These sheets can hold larger half tone dots.Choosing the right Photo stencil sheet for the best print.
15T – Beach towels, Pennant inks, 3D inks, Glitters and Shimmers.
Higher viscosity inks.43T – Textile, solvents and water based inks. Opaque inks.
Best for courser woven/knitted/airtex substrates and fabrics.
55T – fabrics, paper, wood, plastics, glass.
77T – Fine detailed artwork. Half tones. Paper & Board. Textiles.
RED PHOTO STENCIL SHEETS.
stencil sheet red
Use for a wide range of plastisol, water based and solvent based inks
Excellent burning imaging properties
High definition for holding larger half tones (43T will hold 30 lines per inch, 55T will hold 36 lines per inch, 77T will hold 52 lines per inch)
Photo stencil red
Ideal for the novice printer as this sheet is more forgiving when exposing
Use for plastisol and water based inks
High definition for holding half tones
4 minutes exposing time
PHOTO STENCIL SHEET RED COMPATIBLE WITH SCREEN SENSATION MYOS 280
Screen Sensation MYOS 280 Machine using our red sunlight stencil sheets.
Make Your Own Screen UV Exposure Machine makes it quick and easy to make your own screens,
Now You Can Create Your Very Own Screen Designs!
Bring your own designs to life using screen printing by creating your very own screens!
Easily and quickly create stunning home décor projects, custom fabric prints, craft projects, and so much more.
This Make Your Own Screen UV Exposure Machine makes it quick and easy to make your own screens.
Myos 280 Kit Includes:
Make You Own Screens Printer US Power Cable
Top Clear Plate Bottom Black Opaque Plate
Set of 4 Acetate Sheets Print a black and white image onto printable acetate.
Screen Sensation MYOS 280 Instruction Guide Photo stencil A5
Working in a low-light area to prevent damage to the UV-reactive mesh,
lay a piece of mesh on the opaque black plate,
place the design on top of the mesh,
then place the clear plate ( replace this with 2mm clear picture frame glass) on top of the design,
securely sandwiching the elements together.
Screen Sensation MYOS 280 exposure time.
Set the machine’s speed: setting 1 is the slowest , best for red sunlight stencils.
After selecting the speed, feed your sandwiched design into the machine, then the machine will automatically feed the plates through.
Once the plates have been fed through. Screen Sensation MYOS 280
Feed it through again.
Take the clear glass, plate and design off the mesh.
Now submerge the mesh into an opaque container of clean water for 10 seconds,
Start working in normal light conditions.
Lightly wipe the mesh with a sponge or brush where the design has been exposed .
The brushing will remove the UV-reactive material, leaving your design behind.
Sponge both sides of the mesh to fully expose your design.
You can also run a shower or running tap over the mesh to clear the image.
Leave your mesh to dry, making sure it is flat and not touching other screens.
Once the mesh is dry, it’s ready.
Photo Stencil properties, Compatible Screen Sensation MYOS 280
Excellent burning imaging properties
Pre coated stencils – Made by Sunlight Stencils.
No need for emulsion, screens, coating troughs and other equipment!
Simply expose your design onto this pre-coated stencil and then fix it to your frame using staples or tape.
Great for wrapping around cylindrical products or glass!
UV reactive stencil screen sheets exposure times
Blue sunlight stencil sheets,
Expose it to sunlight for 4 minutes .
If in the shade expose it for 6 minutes.
With a uv exposure unit 3 minutes.
Red Sunlight Stencil Sheets
Exposing time in sunlight 30 SECONDS
Exposure in overcast 2 minutes
Exposing in UV exposure unit.30 Secs.
Photo Stencils Red Compatible Screen Sensation MYOS 280
Ideal for the advance printer as these sheets are more forgiving when exposing
Use for plastisol and water based inks Also solvent and UV inks
Choosing the correct ink.
We highly recommend that you consult your ink supplier for advise on mesh counts .
We also recommend that the correct ink retarder is used with all air dry, solvent and water based inks,
When using 55t, 77t , 90t, and 120t mesh count stencil sheets.
Step by step guide links:
Creating your Sunlight Stencil https://sunlightstencils.com/step-by-step-guide-1-creating-your-stencil/
Framing your Sunlight Stencil https://sunlightstencils.com/step-by-step-guide-2-framing-your-stencil/